Energized Study guides, Class notes & Summaries

NEIEP 700 Final Exam Version 1 (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: When an elevator constructor describes a normal open contact or a making contact he or she is describing the same contact configuration. Answer: True Q: As current flows through a relay's coil _______________________ generated by the coil will pull or pick the relay's armature . Answer: Magnetic field Q: The most common relay used today is the plug type....

NFPA 10 Exam 71 Questions with Verified Answers When should wheeled fire extinguishers be considered? - CORRECT ANSWER • High hazard areas are present. • Limited available personnel are present. Requiring: High agent flow rate, Increased agent stream range, increased agent capacity NON-DOT low pressure fire extinguisher cylinders that pass a hydrostatic test shall have the following recorded on a label: - CORRECT ANSWER • Month and year test was performed (perforated) • Test pre...

AMT 2 study guide exam 2024/2025 Amtrak Conductors and Engineer are classified as class ______ employees - CORRECT ANSWER-C. [1.103] Should employees in electrified territory be familiar with the location and operation of radios and telephones? - CORRECT ANSWER-Yes [1.204] When using railroad telephone lines or radios, and you hear the word "EMERGENCY" repeated three times, what must be done? - CORRECT ANSWER-All others using the phone line or radio channel must yield immediately. [1...

During System Restoration, what is the optimal Frequency Range? - 59.75 - 61 Hz The 500 kV system has normal bus voltages between? - 500 to 550 kV When Connecting 2 islands, the operator must match? - Voltage, Phase Angle and Frequency What are the Minimum Source Requirements for a 500kV line? (Gen/mile and load/mile) - 30 MW Gen/mile of energized 500 kV and 20 MW Load/mile of energized 500 kV When will PJM issue a Minimum Generation Alert? (how many MW under normal operating limits) - Whe...

Amtrak Conductors and Engineer are classified as class ______ employees - C. [1.103] Should employees in electrified territory be familiar with the location and operation of radios and telephones? - Yes [1.204] When using railroad telephone lines or radios, and you hear the word "EMERGENCY" repeated three times, what must be done? - All others using the phone line or radio channel must yield immediately. [1.205] All occurrences or conditions which are likely to affect electric Operations...

NEIEP 700 Final Exam Version 1 (Latest 2024 / 2025 Update) Questions and Verified Answers | 100% Correct | Grade A Q: When an elevator constructor describes a normal open contact or a making contact he or she is describing the same contact configuration. Answer: True Q: As current flows through a relay's coil _______________________ generated by the coil will pull or pick the relay's armature . Answer: Magnetic field Q: The most common relay used today is the plug type. Answer: True Q: The maj...

IFSTA Chapter 6 & 7 Exam | Questions and Verified Answers| 100% Correct Q: When an extinguishing agent is determined to be safe and effective for use on combustible metals, it will: A) include the test results on the face plate B) include application instructions on the faceplate C) be given a numerical rating based upon the amount of fire it can extinguish D) be a different color than extinguishers designed to extinguish other classes of fire Answer: B) include application instruc...

NEIEP 700 Final Exam Version 2 (Latest 2024 / 2025 Update) Questions and Verified Answers | 100% Correct | Grade A Q: What is the primary reason AC relays hum or chatter? Answer: AC cycle reversal Q: Which of the following best describes the contact rating of a magnetic switch? Answer: The maximum voltage and current that can be safely interrupted Q: How can you reduce contact arcing on plug-in relay contacts? Answer: Wire two contacts of the same relay in series Q: How are latching relays reset...

NEIEP 700 Final Exam Version 2 (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: What is the primary reason AC relays hum or chatter? Answer: AC cycle reversal Q: Which of the following best describes the contact rating of a magnetic switch? Answer: The maximum voltage and current that can be safely interrupted Q: How can you reduce contact arcing on plug-in relay contacts? Answer: Wire two contacts of the same relay in series ...

Electrical devices operating at less than ___ volts and not supplying more than ___ watts of energy shall be exempt from requiring an electrical permit. CORRECT ANSWER 25,50 Section R105.2 Electrical #4 Who has the authority to give permission to provide temporary power? CORRECT ANSWER Building Official Section R107.3 A ______ conductor is a conductor that is encased within a material or has a thickness NOT recognized by the IRC as electrical insulation. CORRECT ANSWER Covered De...

Red Cross EMR Final Exam Questions and Answers 100% Pass It is important to listen empathetically and use a gentle tone of voice with family members of a dying person because- A: research has found that these behaviors will encourage the family members to follow your instructions B:these behaviors will help the family cope with the situation C: family members need to express their rage and anger, misbehaviors will make you a likely, neutral, target D: false reassurance is and words of hope ...

At what torque angle of operation does power typically begin to flow from the generator to the system? A) 90 degrees B) 60 degrees C) 30 degrees D) 10 degrees 10 degrees Choose the answer that best describes the operation of a rotor. A) The stationary part of the transmission system. B) A type of superconductor. C) The stationary element of a generator that has its windings connected to the system. D) The excited (energized) field winding that rotates inside the stator to induce current into the...