Condenser Study guides, Class notes & Summaries

Portage Learning microbiology module 3 Exam 2024 A nanometer is defined as: -Answer-10-9 A nanometer is defined as one-billionth of a meter True or False: A nanometeris longer than a micrometer -Answer-False. A nanometer is 1,000 times smaller than a micrometer. Resolution and contrast are two critical factors that influence your ability to see an object. Explain each. -Answer-Resolution refers to the distance between two objects at which the objects still can be seen as separate. Poor o...

The Problem with Stucco is that it____ - ANSWER-tends to crack How should corner moldings on aluminum sliding be installed - ANSWER-upper molding overlapping A hinge door that rubs the frame may have - ANSWER-loos hinge screws Discoloration or fogging in a window is an indication of - ANSWER-a leaking insulated glass seal what would not be the cause of a sag in a porch ceiling - ANSWER-rotting fascia board what is most highly recommended for repairing aluminum branch circuit wir...

Charging a heat pump with refrigerant is best accomplished in the _______ mode. A: Heating mode B: Cooling mode C: Defrost mode D: Emergency heating mode CORRECT ANSWER B: Cooling mode Heat pumps can provide both heating in the winter and cooling in the summer. In which mode is the heat pump more efficient? A: Heating mode B: Cooling mode C: Defrost mode D: Emergency heating mode CORRECT ANSWER A: Heating mode Which of the following components is exclusive t...

ACG CxA Exam Prep Questions and Answers 100% CorrectACG CxA Exam Prep Questions and Answers 100% CorrectACG CxA Exam Prep Questions and Answers 100% CorrectACG CxA Exam Prep Questions and Answers 100% CorrectACG CxA Exam Prep Questions and Answers 100% Correct AABC - ANSWER-Associated Air Balance Council What does CWS stand for? - ANSWER-Condenser water supply ASHRAE - ANSWER-American Society of Heating, Refrigerating and Air-Conditioning Engineers SMACNA - ANSWER-Sheet Metal and Air C...

BOMA – HVAC QUESTIONS AND ANSWERS 100% PASS Two basic categories of chillers are the compression cycle and absorption The five requirements for comfort are proper temperature, humidity, filtration, and ventilation circulation The primary function of an expansion device is to produce a reduction in the pressure on the liquid refrigerant, regulate the flow of refrigerant into the evaporator, lower the boiling point of the refrigerant far enough below the temperature of the load to g...

FDNY Z51 RMO Questions and Answers 100%Verified Graded A+ already passed!! the efficiency of the refrigerant cycle is affected by the operation of the condenser. Of the following, a more efficient centrifugal compressor operation results from - correct answer lowering the condenser pressure In most semi hermetic compressors, the suction vapor is used for - correct answer cools the motor The amount of refrigerant that flows through the orifices of an economizer is determined by the - corre...

A change in a project is a made due to errors/emissions - Constructive change A condenser that consists of a welded steel shell containing a number of straight tubes fastened in tube sheets that close the shell - Shell-and-tube condenser A heat pump that takes heat from the outdoor air and rejects it to the inside space in the winter. In the summer, the reverse happens-heat from indoors in rejected outside. Most commonly found in residential and smaller commercial applications, due to being...

ESCO Light Commercial Refrigeration EXAM 2024/2025 with Complete Solutions. In a dry type (direct expansion) evaporator, liquid refrigerant must boil away as close to the end of the coil as possible in order to: A. operate at high efficiency. B. ensure that frost does not accumulate. C. sub-cool the compressor. D. ensure proper oil return. - Answer - A. operate at high efficiency. The difference between the temperature of the refrigerant boiling in the evaporator and the temperature at t...

fdny z51 rmo questions answered 2023 verified graded A+ already passed!the efficiency of the refrigerant cycle is affected by the operation of the condenser. Of the following, a more efficient centrifugal compressor operation results from lowering the condenser pressure In most semi hermetic compressors, the suction vapor is used for cools the motor The amount of refrigerant that flows through the orifices of an economizer is determined by the difference between the high side an...

HVAC (EPA Certification Exam Section 608) Questions With Verified Solutions | ALREADY PASSED | LATEST REVISED UPDATE What does a metering device do? - ANSWER The metering device causes a reduction in pressure, and therefore a reduction in saturation temperature. What is absorbed in the evaporator? - ANSWER Heat is absorbed in the evaporator. What happens in the evaporator? - ANSWER Heat is absorbed in the evaporator and causes the refrigerant to boil from liquid to vapor. At...

2024 update DC Third testing Questions and Answers 100% Pass The component in which liquid vapor by absorbing heat is called? - Correct Answer ️️ - Evaporator Select the best answer electrical grounding method? - Correct Answer ️️ -Metal stake drive 8 foot into the ground. A _____ valve should be used for throttling purpose? - Correct Answer ️️ -Globe What is the acceptable range for residual sodium sulfite in the boiler maintain? - Correct Answer ️️ -30-70 What is the B...

Z-51 REFRIGERATION TEST With Correct Solutions 2024 Update Efficiency of the refrigerant cycle is affected by the operations of the condenser. Of the following, a more efficient centrifugal compressor operation results from: - Answer -Lowering the condensing pressure The heat removed from the refrigerant in a condenser is: - Answer -Sensible and latent heat The refrigerant unit that you have been assigned to is being taken out of service for a major repair. You have been assigned to withdr...