Steer Study guides, Class notes & Summaries

Which of the following is the proper way to adjust the rack yoke bearing? A. Tighten to 75 ft lbs. B. Tighten to 5 inch lbs. C. Tighten and then back off the original equipment manufacturer's (OEM) specifications. D. Tighten to 0.002" end-play. Tighten and then back off the originial equipment manufacturer's (OEM) specifications. Many OEMs will recommend that the technician tighten to a specification then back off a certain number of degrees. A customer says that the steering whee...

The above alignment setting would results in which of following conditions - Answer-Right tire wear on the inside, vehicle pulls to the left Reason: the vehcile will always pill to the side with (+) camber A driver says that the front end of his car vibrates up-and-down while traveling at most road speeds . Technician A says that too much runout of the front wheels could be the cause. Technician B says that static out-of-balance of the front wheels could be the cause. Who is right ? - Answ...

2024 CA DMV Permit Test GRADED A+ (ACTUAL TEST ) Questions and Answers (Solved) 1. When planning to pass another vehicle you should: A. Assume they will let you pass if you use your turn signal B. Assume they will maintain a constant speed C. Not assume they will make space for you to return to your lane Answer: C. Notassume they will make space for you to return to your lane 2. You are driving and there are oncoming cars on your left and a row ofparked cars on your right.You should s...

A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Technician A says that too much runout of the front wheels could be the cause. Technician B says that static out-of-balance of the front wheels could be the cause. Who is right? A. Technician A only B. Technician B only C. Both A and B D. Neither A of B - Answer-The correct answer is C, both technicians are right. Too much runout or static out-of-balance in the front wheels will cause a vibr...

The driver of a truck says that he hears clattering noise from the friend axle when driving on a rough road. Tech A says the cause could be worn shock absorber mounting bushings. Tech B says the cause could be worn shackle bushings. Who's right? Tech A Tech B Both Neither - Answer- C The driver of a truck that has just had its front springs and hangers replaced says that it is hard to keep the steering wheel straight-ahead position. Tech A says gathering cause could be that the caster s...

CERAD 3 Law Exam Verified Questions & Correct Answers | Latests update ABS - ANSWER Passive safety feature allowing you to steer whilst breaking (pulsating method) When is vehicle most stable? - ANSWER Straight line, constant speed (pulling with no acceleration), even weight distribution Tread depth and size on road - ANSWER 1.6 mm across central ¾ tread depth 1mm for commercial Tyre on road for 1 CD case Understeer vs Oversteer - ANSWER Understeer- skid and straight line (fr...

COM3708 Assignment 1 (PORTFOLIO DETAILED ANSWERS) Semester 2 2024 - DISTINCTION GUARANTEED - DISTINCTION GUARANTEED - DISTINCTION GUARANTEED Answers, guidelines, workings and references .... PHASE 1: ASSESS Outcome of phase 1 A document should be produced that exhaustively details particulars of the audience assessment, the organisation's broader operations and objectives, the pertinent environmental conditions, historical and future considerations, as well as the details, perceptions, status...

A vehicle has excessive body sway while cornering. Which of these is most likely to cause this condition. A. A binding ball joint. B. A warn idler arm. C. Warn control arm bushings. D. Warn stabilizer bar bushings - Answer-D. Warn stabilizer bar bushings A vehicle with variable assist steering feels loose only at highway speeds. Technician A says this is likely caused by the vehicle speed sensor. Technician B says this could be caused by reduced pressure to the steering gear at high sp...

ASE Steering Exam Questions And Answers The driver of a truck says that he hears clattering noise from the friend's axle when driving on a rough road. Tech A says the cause could be worn shock absorber mounting bushings. Tech B says the cause could be worn shackle bushings. Who's right? Tech A Tech B Both Neither - ANS C The driver of a truck that has just had its front springs and hangers replaced says that it is hard to keep the steering wheel straight-ahead. Tech A says gatheri...

1500 psi - Answer-High pressure hoses have to be used on the high pressure side of the power steering system because pressures can reach as high as __________. A) 200 psi B) 750 psi C) 2500 psi D) 1500 psi False - Answer-All power steering pumps have integral reservoirs. True or False? all of the above are correct - Answer-Which of the following represent typical power steering pressures? A) over 750 psi when slowly maneuvering a parking lot B) about 450 psi when cornering C) less t...