Nace cip 1 exam q a Study guides, Class notes & Summaries

NACE CIP Level 1 Exam Questions and Verified Answers| 100% Correct| (2023/ 2024 Update) Q: Improper atomization of the coating may cause which of the following? (Select all that apply.) Answer: A. Uneven DFT Dry spray C. Overspray Q: High viscosity due to low temperature should be corrected by ? (Select all that apply.) Answer: A. Adding extra thinner (B) Heating the coating Q: One advantage of conventional spray is Answer: A. Applicator control Q: Solvent bor...

NACE CIP 1 CBT 2023 Exam | Questions with Verified Answers (Newly Updated 2023) Q: When reporting the wet film thickness from a wet film thickness comb/gauge (WFT) you report? Answer: The last tooth that has coating on it. Q: Adding an incorrect solvent to a coating may cause? Answer: Non drying and non curing. Q: You are reviewing the documentation for a tank waiting project and notice there is a conflict between the project specification and the manufacture's product ...

NACE CIP Level 2 Exam (2023 Update) Questions and Verified Answers Q: What does re-enforcing add to a resin? Answer: Strength Q: Some resins used in re-enforced linings: Answer: 1. Polyester 2. Epoxy 3. Vinyl ester Q: Lining Definition Answer: A coating normally in immersion service Q: Thermal spray safety practices Answer: 1. HP rated hoses 2. Never use compressed air to clean work area or clothing 3. Don't use plant air for breathing air Q: Com...

NACE CIP L1 Exam 2023 Questions and Verified Answers Q: The estimates for coating failures attributable to inadequate or poor surface preparation ranges between _____% to _____% Answer: 75-90% Q: Any deviations from the specification are always authorized and documented in _______. Answer: Writing Q: Centrifugal blasting operations should use the SSPC-SP ____ preparation standard before blasting begins Answer: SSPC-SP 1 Q: Does waterjetting leave a anchor p...

NACE CIP Level 1 Exam 2023 | Guide with Verified Answers (2023/2024 Update) Q: What are the two primary components of a liquid applied coating? Answer: Pigment, Vehicle (Resin/Binder + Solven) Q: What are the three (3) methods by which a coating provides corrosion control? Answer: barrier, inhibitive, sacrificial (cathodic protection) Q: What are the three different ways a coating can adhere to the surface? Answer: Chemical, Mechanical, Polar/valance or combo of al...

NACE CIP 2 Exam| Questions and Verified Answers (2023/ 2024) Q: Disadvantages of Plural component spray over single component spray Answer: higher cost, high volt heaters are required, more qualified operator, more hoses for operator to work with Q: Advantages of Plural component spray over single component spray Answer: Accurate mixing without human element, sprays very thick solvent free materials without thinners & sprays materials with very short pot life. Q: 2 major...

NACE CIP 2 Exam 2023 Questions and Verified Answers Q: What is the safety device that high-pressure hoses are fitted with? Answer: Whip-lock or whip check Q: What is the section of hose next to the gun fitted with? Answer: Hose shroud Q: What are the two basic categories that water jetting equipment fall into? Answer: Manual & Robotic Q: What category does the majority of water jetting fall into? Answer: Manual Q: What is the effect when water...

NACE CIP 1 CBT 2023 Exam | Questions with Verified Answers Q: Depth of surface profile can be evaluated by several methods: Answer: - ISO comparator - replica tape - digital profile gauge Q: The ISO Comparator grades may be recorded: Answer: Finer-than-fine grade, fine grade, medium grade, coarse grade, coarser than coarse grade Q: The two types of replica tape that are commonly used are: Answer: - coarse (0.8-2.5 mils) - X coarse (1.5 to 4.5 mils) Q: Lis...