Cwb exam 2024 Study guides, Class notes & Summaries

CWB Module 1 exam | Questions and Correct Solutions 2024/2025 | Graded A+ True or False? Creating a safe working environment is strictly the responsibility of the employer? - Answer -False, it the the joint responsibility of the employer and employee. WHMIS stands for: a) Workers Health Monitoring System b) Workplace Hazardous Materials Information System c) Workers for a Healthy Manufacturing Industry Society - Answer -b) Workplace Hazardous Materials Information System What are thre...

CWB Level II exam | Questions and Correct Solutions Latest Update 2024/2025 | Graded A+ What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat treatment (D) Sensitization - Answer -(D) Sensitization Note: Also known as "carbide precipitation" -- Chrom...

CWB RED SEAL EXAM 2024 WITH 100% ACCURATE SOLUTIONS what type of power supply is required for GTAW? - correct answer constant current in a constant voltage output system, increasing tip to work distance increases the resistance in the power circuit. What is the effect on current flow? - correct answer decreases the current Electrodes that are exposed to the environment for more than 4 hours should be? - correct answer rebaked at 370 to 430 degrees C the GMAW process protects its we...

CWB Welding Inspector Level 3 Exam Prep-with 100% verified solutions 2024

CWB Exam Questions and Correct Solutions 2024 1.To measure the strength of a welded joint what mechanical test would you prescribe? a) A transverse weld tension test b) A charpy test. c) A CTOD test. d) An all weld metal tension test. e) A side bend test. - Answer -a) A transverse weld tension test 2. Select the cutting process that would provide the narrowest heat affected zone when cutting 12.5 mm (0.5 in) thick carbon steel. a) Oxy-acetylene cutting. b) Air-carbon arc cutting. c) O...

CWB Welding Inspector Level 3 Exam (New 2023/ 2024 Update) Guide with Questions and Verified Answers_ All Modules Covered_ 100% Correct_ Grade A QUESTION Is Bauxite classified as a mineral ? Answer: No, bcz it is an admixture of Al hydroxide compounds with an aluminum oxide content in the range of 45%-60% that also contains an appreciable amount of iron. QUESTION What are the naturally occurring impurities in Bauxite? Answer: 3% - 25% iron-oxide, 2.5% - 1...

CWB Module 6 ELECTRODES AND CONSUMABLES EXAM | Questions and Correct Solutions | Latest Update 2024/2025 | Graded A+ EXAM PRACTICE Today, most mild steel electrodes have a wire core composed of? A) rimmed steel B)semi-killed steel c) fully killed steel d)cold-rolled steel - Answer -fully killed steel EXAM PRACTICE In medium coated electrodes, the percentage of the electrode weight derived from the coating is: a)10-25% b)20-35% c)25-40% d)25-55% - Answer -20-35%EXAM PRACTICE The ...

CWB Module 4 Welding Processes exam | Questions and Correction | Latest Solutions and Solutions 2024/2025 | Graded A+ What is E4918-X? - Answer -E=Electrode 49= tensile strength 1=position (1=all, 2=Horiz Fillet & Flat, 4=vert down) 8=coating type -X= optional improved toughness What are the three Coating Type Classes? - Answer -EXX10 & EXX11 = Cellulose EXX12, EXX13, EXX14 = Titania EXX15, EXX16, EXX18 = Basic What type of electrodes are prone to moisture absorption? - Answer - Ba...

CWB Module 4 Welding Process and Equipment exam | Questions and Verified Solutions 2024/2025 | Graded A+ Active Flux - Answer -significantly influence the weld puddle - add manganese, silicon, chromium to weld metal - typically bonded type flux Arc Blow - Answer -The deflection of an arc from its normal path due to magnetic forces. Autogeneous Weld - Answer -A fusion Weld made without filler metal Duty Cycle - Answer -The time during a ten-minute test period, expressed in percentage, ...

CWB 1 Exam Questions and Verified Solutions 2024 1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - Answer -b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld: a) Undercutting. b) Porosity. c) S...