Shear strength of soil Study guides, Class notes & Summaries

CMP 305 Test Questions with All Correct Answers Montmorillonite is known to have what properties? - Answer-high volume changes and weak bonds phase diagram displays what? - Answer-relationship between volume and weight of a soil bunk does clay absorb more or less water than other types of soils - Answer-more, clay attracts water when is angular-granular soil at its highest shear strength? - Answer-when it is in a dense condition and has a low void ratio of the four soil groups wh...

EINSTEIN COLLEGE OF ENGINEERING Sir.C.V.Raman Nagar, Tirunelveli-12 Department of Civil Engineering CE 42- SOIL MECHANICS Lecture notes Prepared by BEULA ANGEL S.G & A.PONNIAHRAJU SOIL MECHANICS SUBJECT CODE : CE 42 EINSTEIN COLLEGE OF ENGG DEPT OF CIVIL ENGG CE 42 SOIL MECHANICS OBJECTIVE After undergoing this course, the student gains adequate knowledge on engineering properties of soil. 1. INTRODUCTION 10 Nature of Soil - Problems with soil - phase relation - sieve analysis ...

ICC (EC) Soils - Material Testing combined Questions With Verified Answers | UPDATED The strength of a soil, or the ability to compact a soil into a suitable construction material will depend on? - ANSWER Soil type Soil density The amount of water in the soil Types of soils - ANSWER Gravel (mm to cm's in size) Sand (mm in size) Silt (fine particles with little cohesion) Clay (has cohesion, can stick together) Organic soils (peat, topsoil) Organic soils (O) - ANSWER Have a large c...

ICC (EC) Soils - Material Testing combined Questions With Verified Answers | UPDATED The strength of a soil, or the ability to compact a soil into a suitable construction material will depend on? - ANSWER Soil type Soil density The amount of water in the soil Types of soils - ANSWER Gravel (mm to cm's in size) Sand (mm in size) Silt (fine particles with little cohesion) Clay (has cohesion, can stick together) Organic soils (peat, topsoil) Organic soils (O) - ANSWER Have a large c...

Factor of safety depends on correct answers Type of soil, site characterization of data, soil variability, consequence of failure, likelihood of design load occurrence Factor of Safety: type of soil correct answers shear strength of clay is less reliable than that of sands, and more failures have occurred in clays than in sand. So use high factor of safety in clays. Factor of Safety: soil variability correct answers use higher factor of safety for projects on sites with erratic soil profil...

Soil correct answers This is an uncemented aggregate of mineral grains and decayed organic matter (solid particles) with liquid and gas in the empty spaces (voids) between the solid particles. Soil correct answers This is used as a construction material in various civil engineering projects, and it supports structural foundations. 1. Origin 2. Grain-size distribution 3. Ability to drain water 4. Compressibility 5. Shear strength 6. Load-bearing capacity correct answers Six soil proper...

Elastic modulus ~ Relative stiffness of a material; ratio of elastic stress to elastic strain Strength ~ Stress level when failure/yield occurs for a given material Cohesion ~ Shear strength of a material not dependent on normal pressure Friction ~ Shear strength of a material that is dependent on normal pressure Ductility ~ Relationship between stress and strain after the yield of a material has been reached Porosity ~ The percentage of the total volume of a rock or sediment that c...

Geotechnical Design Exam Review 2024 Graded A What are indicator piles. and how do they benefit the foundation design process? - Answer-Indicator piles are prototype piles that are constructed before the production piles. These prototype piles are typically evaluated using pile driving analyzers, load tests, or other means to evaluate their load capacity. The results of these evaluations are then used to guide the design and construction of the production piles. In many cases, the indica...

In a Cone Penetration Test, the cone resistance and the cone side friction were 200 Mg/m^2 and 6 Mg/m^2, respectively. The most likely soil at the test site is: Clayey silt Silty Sand Clay Clayey Silt A shear vane 75 mm in diameter was pushed into an undistributed soil and rotated to measure the undrained shear strength. The maximum torque recorded in the vane was 0.15 N m. The undrained shear strength of the soil is:

ICC (EC) Soils - Material Testing combined Questions With Verified Answers | UPDATED The strength of a soil, or the ability to compact a soil into a suitable construction material will depend on? - ANSWER Soil type Soil density The amount of water in the soil Types of soils - ANSWER Gravel (mm to cm's in size) Sand (mm in size) Silt (fine particles with little cohesion) Clay (has cohesion, can stick together) Organic soils (peat, topsoil) Organic soils (O) - ANSWER Have a large c...