Exam (elaborations)
Tattoo Exam Questions and Complete Solutions Graded A+
- Course
- Institution
Tattoo Exam Questions and Complete Solutions Graded A+
[Show more]
Content preview
Tattoo ExamQuestions and
Complete Solutions
Graded A+
Denning [Date] [Course title]
,When the armature bar is flat on the front coil, what is the smallest gap above the rear coil? - Correct
Ans: .010
What does a smaller gap above the rear coil cause? - Correct Ans: More power
What should the armature bars be made of? - Correct Ans: Plain steel
How does a machine run if too much of the coil is showing? - Correct Ans: Hot
What type of edges should your contact screw have? - Correct Ans: Rounded and smooth
Where on the front spring should the contact screw be hitting? - Correct Ans: Front and end of spring
What length of spring would run faster? - Correct Ans: Short spring with high angle
What type of metal should the contact screw be made of to have the highest conductivity? - Correct
Ans: Brass
How does the armature bar hit the front coil core? - Correct Ans: Flat, full contact
What do you want the frame on your tattoo machine to be? - Correct Ans: Non-conductive
What happens when your machine is conductive and electrified? - Correct Ans: The armature bar sticks
to the coils causing the matching to stay in an "on" setting
What diameter should your post binding be? - Correct Ans: 5/16
What happens if you use a steel contact screw? - Correct Ans: Can cause unwanted spark
,When setting up your machine, why would you "snug" down the eye of the needle bar? - Correct Ans:
This helps to prevent weak and jumpy lines
Why is a once-piece contact screw the best choice? - Correct Ans: Screws with things added on top can
cause vibration
What are the two advantages of to using a brass contact screw? - Correct Ans: 100% conductive and
keeps its shape longer than other choices
How much if the contact screw should be touching the front spring? - Correct Ans: A tiny contact area
Why should you use plain steel for a spring rather than a coated spring? - Correct Ans: The coating
wears away quickly, which causes a bad connection
What kind of reaction can you expect from a machine with a very low spring angle? - Correct Ans:
Spongy and weak
Which type of machine benefits the best from a shorter spring? - Correct Ans: A liner
Which spring is the most important for tuning the machine? - Correct Ans: The rear spring
A machine that is very hard hitting and fast running moves the needle in and out of the skin so fast that
_____? - Correct Ans: It doesn't leave enough pigment behind
What is the ideal width of the springs used on the machine? - Correct Ans: The springs should be just as
wide as the part they're attached to
What types of screws should you use to hold the coils to the frame? - Correct Ans: Always use a
magnetic screw that sits flush to the frame
What is the function of the tube vise? - Correct Ans: Firmly hold the tube in place and properly align the
tube while the machine is in use
, How should a tube vise hold a tube in comparison to the machine? - Correct Ans: Squarely front to back
and side to side
What is the most important part of a tattoo machine? - Correct Ans: Coils
What is the purpose of the coils of a tattoo machine? - Correct Ans: To run consistently and not lose
power
What is a possible reason for the machine to not work at all? - Correct Ans: There is debris between the
contact screw and the front spring
What can cause the coils to be in a constant "on" position? - Correct Ans: A coil wire, soldering lug, or
any of the electrical circuit touching the frame
What does your frame act as for a coil circuit? - Correct Ans: The ground
What is not a purpose of the binding posts? - Correct Ans: Electrical contact from the soldering lugs to
the contact screw
What is a safety feature of the cartridge needles? - Correct Ans: If the cartridge is not installed in the
machine or tube, then the needles are not exposed; this limits the possibility of needle stick
What does EPA stand for? - Correct Ans: Environmental Protection Agency
What does FDA stand for? - Correct Ans: Food and Drug Administration
What does "high level disinfectant" mean? - Correct Ans: A chemical agent, registered with the EPA,
which has demonstrated tuberculocidal activity
"Office" in the tattoo laws refers to what? - Correct Ans: Health licensing Office
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller YourExamplug. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
74735 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now