Asme section 9 exam - Study guides, Class notes & Summaries

ASME SECTION 9 EXAM QUESTIONS WITH CORRECT ANSWERS...

API 570 Exam Questions With 100% Correct Answers. Code to follow when performing an internal inspection on pipe - answer"API 510" Positive material identification (PMI) - answer"API 578" Fitness for service - answer"API 579" Risked based inspection (RBI) - answer"API 580" Valve inspection and testing - answer"API 598" Cathodic protection - answer"API 651" Welding on in-service equipment containing the flammables - answer"API 2201" NDE procedure guidelines - answer"ASME SE...

API 570 Open Book Exam Questions with Certified Solutions 1- A hydrotest is being conducted on an underground line as a substitute for the external inspection. The test pressure is 200 psig. At the end of the test, the pressure must be at least: C.190 psig 2- Determine the maximum allowed pressure for a class 300 flange that has a design temperature of 950 degrees F. The flange material is ASTM A217 gr.C12 B. 375 psig 3- An 8 NPS pipe is being replaced with A106 gr. B material. Th...

Massachusetts 1A Hoisting License Exam Questions and Answers Latest Updated 2024/2025 | Scored A+. Where should a license or temporary permit be located during time of operation of equipment:  Shall be carried ON the person at all times; in the case of a temporary permit the person shall also carry their drivers license 2. Whats the fine for violating section 53, 53a or 54:  No less than $500 and no more than $3,000, or by imprisonment of no more than 3 months, or both fin...

ASNT VT Level II Exam QUESTIONS AND ANSWERS WITH COMPLETE SOLUTION 2023 B. - 1. Per ASNT Section XI, NDE personnel shall be recertified: A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining B. - 2. Per SNT-TC-1A, when an employee leaves his employer: A. his certification automatically transfers to his new employer B. his certification is automatically terminated...

API 570 Open Book Exam Questions and Answers 100% Pass A hydrotest is being conducted on an underground line as a substitute for the external inspection. The test pressure is 200 psig. At the end of the test, the pressure must be at least: - Answer- C.190 psig 2- Determine the maximum allowed pressure for a class 300 flange that has a design temperature of 950 degrees F. The flange material is ASTM A217 gr.C12 - Answer- B. 375 psig 3- An 8 NPS pipe is being replaced with A106 gr. B mater...

NEIEP 200 Final Exam (courses 205- 250): Questions & Answers NEIEP 200 Final Exam (courses 205- 250): Questions & Answers you are about to loosen a fishplate bolt. which wrench would be least likely to slip? (Ansa. 6 point box end wrench b. 12 point box end wrench c. open end wrench you are using a plumb line to check a rail for plumb. you find that at the top it measures 1" and at the bottom it measures 1 1/4". what does this tell you? (Ansa. the top of the rail needs to go towards...

NEIEP 200 Final Exam (courses 205- 250): Questions & Answers NEIEP 200 Final Exam (courses 205- 250): Questions & Answers you are about to loosen a fishplate bolt. which wrench would be least likely to slip? (Ansa. 6 point box end wrench b. 12 point box end wrench c. open end wrench you are using a plumb line to check a rail for plumb. you find that at the top it measures 1" and at the bottom it measures 1 1/4". what does this tell you? (Ansa. the top of the rail needs to go towards...

ASNT VT Level II Exam (General Questions) With Complete Answers Graded A+ B. every 3 years by retraining and retesting 1. Per ASNT Section XI, NDE personnel shall be recertified:A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining B. his certification is automatically terminated 2. Per SNT-TC-1A, when an employee leaves his employer:A. his certification automatically transf...

API 571 PRACTICE QUESTIONS FOR API 570 EXAM What does "L" mean in Austentic SS, like 304L? A) Has a low carbon content B) has a low chrome content C) has a low nickel level D) has a low toughness level E) is lousy steel A What does "H" mean in Austenitic SS, like 316 H? A) Has a high carbon content B) has a high chrome content C) has a high nickel level D) has a high toughness level E) is horrible steel A Which of the following is NOT a Ferritic Steel? A) 300 Series SS B) ...